ATTENTION

Kitesurfing is an extreme sport, and the user of the equipment assumes full responsibility for any consequences resulting from its use.

Every new board is covered by a 3-year limited warranty.

All of our used boards (deck only) can be replaced with a new one! For 50% of the list price of the full kit (price on the website).

More information can be found HERE

Information and advice:

Clean dirt using non-aggressive substances, such as soapy water or white spirit.

Always thoroughly clean the board of any sand, and if possible, rinse it in fresh water after riding.

The board can fade if exposed to direct sunlight for extended periods, so avoid storing it in direct sunlight when not riding.

When transporting, use a special cover or protect both surfaces of the board (e.g., with a towel).

Transport the board disassembled (the tabletop and accessories are separate). We recommend having a box for the fins and all screws to avoid losing small items. Remember that the fins are sharp and can easily pierce fabric, a bag, or your hand.

If you have a split board, remember that the screws connecting the platform to the two parts of the board are shorter than the others. They should also be installed using the special washers included in the kit (that's why the box mentioned above is useful – the washers are easy to lose).

The handle screws are also shorter than the others.

Always assemble the board by hand using a Phillips PH 4 or 5 screwdriver. Using any type of power screwdriver or incorrect bits can damage the inserts or screws.

Before screwing the board together, make sure the threads are clean, especially free of sand and other small particles.

The screws should be fully inserted, with slight resistance. Only when they are fully inserted should you tighten them firmly, pressing the screwdriver firmly to avoid damaging the grooves.